M.2 SATA

M.2 2280 SATA PT31
- M.2 (NGFF) standard of 22mm wide, 80 mm long
- Industrial Micron 3D TLC, up to 10K P/E Cycles
- Sustained write performance in direct TLC mode
- Up to 1TB capacity with DRAM buffer
- Support commercial/extended/wide temp.
- Built-in LDPC ECC, RAID engine and OCP/OVP
- mSMART storage device monitoring
MEMXPRO M.2 2280 SATA PT31 is high-performance SATA III 6Gb/s solid state disk with 10K P/E cycle industrial 3D TLC NAND to boost system performance and enhances the endurance compared to 2D NAND SSDs. The PT31 series supports direct TLC mode whilst keeping its MLC-like performance with sequential read/write speeds of up to 560/525MB/s. Featuring LDPC ECC and RAID Engine technologies, PT31 series ensures data integrity and the safety of data transmission. Wide temperature -40°C to +85°C solution is available for embedded applications, industrial equipment, and edge devices operating in challenging environments.
Interface | SATA III |
Form Factor | M.2 SATA (2280/S2/D2) |
Controller | SMI SM2259 |
NAND | 3D TLC (Original Micron B17A) |
P/E Cycle | 10,000 (Pure TLC Mode) |
Max. Channel | 4 |
Capacity | 64GB~1TB |
Sequential R/W (MB/sec, max.) | 560/520 |
Operating Temperature | 0°C~+70°C/-25°C~+85°C/-40°C~+85°C |
Max. Power Consumption | 3.3W (3.3Vx1000mA) |
Dimension (L x W x H/mm) | 22x80x2.15 / 22x80x3.5 |
Operating Voltage | 3.3V±5% |
Storage Temperature | -55°C~+95°C |
External DRAM Buffer | ✓ |
Thermal Sensor | ✓ |
DEVSLP Mode | Optional |
Vibration | 20G (7~2KHz) |
Shock Resistance | 1500G@0.5ms |
MTBF | >3 million hours |
Type | Documentation | Size | Format |
---|---|---|---|
Datasheet | MEMXPRO_DataSheet_M 2_2280_SATA_PT31_V1.5.pdf | 402.3KB |